Recent Activity

andrea De Bortoli replied to the thread Heidelberg MOPV 1991 Plate register not working.

so, the MOT1 and MOT2 are interchangable? can i swap to test if the problem changes?

junker1984 attached a file to the thread Heidelberg MOPV 1991 Plate register not working.

This should have come with your machine.

junker1984 replied to the thread Heidelberg MOPV 1991 Plate register not working.

That is correct, cylinder movement via CPC only.

andrea De Bortoli replied to the thread Heidelberg MOPV 1991 Plate register not working.

The CPC has 5 STK power supply all voltages are in spec, 2 MOT card, REK 1/2, 2 MWE card

andrea De Bortoli replied to the thread Heidelberg MOPV 1991 Plate register not working.

So the problem is inside the CPC and not in the CPtronic in the cabinet as the electritian said, do you have the wiring diagram of the CPC?

junker1984 replied to the thread Heidelberg MOPV 1991 Plate register not working.

Pardon me if I'm missing something, but every machine I have ever installed and repaired has had the ink zones, lateral and...

Shay alon print posted a new thread.

cp 2000 keeps restarting

cp 2000 keeps restarting the problem started after the print deleted from the diagnostics the third line s msk encoder fffe what to do?...

Forum: Heidelberg Printing Presses

andrea De Bortoli replied to the thread Heidelberg MOPV 1991 Plate register not working.

The CPC monitor says the register value, but pressing the lateral, circunferential and diagonal registers button the value remains the same

andrea De Bortoli replied to the thread Heidelberg MOPV 1991 Plate register not working.

So i have to control the wiring diagram of the CPC to try to find the problem? and not the SSK board that says that drive the servo motors?

junker1984 replied to the thread Heidelberg MOPV 1991 Plate register not working.

Plate cylinder register servo control is controlled via CPC console, not CPTronics.

andrea De Bortoli attached a file to the thread Heidelberg MOPV 1991 Plate register not working.

Hi, all the powersupply are ok, all voltages are in specs and all fuse are ok, where is the MOT board? i tried to swap the ssk card but...

junker1984 replied to the thread Heidelberg MOPV 1991 Plate register not working.

MOT board, power supply, protective fusing...

andrea De Bortoli posted a new thread.

Heidelberg MOPV 1991 Plate register not working

Hi, i have a Heidelberg MOPV 1991 and all plates register are not working after changing the RGP2 card what is creating this issue? Thanks

Forum: Heidelberg Printing Presses

ADK attached a file to the thread Man Roland 300 - CPL process bus error.

Hi sir we have problem in man roland Tyepe 300 machine error code 0910004 please help me.

ADK replied to the thread Man Roland 300 - CPL process bus error.