Recent Activity

CHOCK replied to the thread 2011 ElTosch Dryer.

All printed circuit electronic boards. OK? Blessings.

johnq04 replied to the thread 2011 ElTosch Dryer.

Thank you for the response. Please describe the location of the PC Boards to examine the edge connectors. Our pressman could not locate.

CHOCK replied to the thread 2011 ElTosch Dryer.

Hi Sir: Please review this: 1) Perform a visual inspection : look for loose and broken wires, improperly seated connectors, loose or...

johnq04 posted a new thread.

2011 ElTosch Dryer

Anyone familiar with the following error on the ElTosch Dryer for a 2011 ManRoland 504? [ATTACH] [ATTACH]

Forum: Man Roland Printing Presses

printer55 posted a new thread.

Heidelberg Suprasetter A52 - Error 5701

Hello guys, We have the error 5701 on our Suprasetter A52. We checked and cleaned the belt and mesured the tension - all seem fine....

Forum: Platemaking

Adil replied to the thread INK Fountain Liner Problem.

when there is wear in this part this directly means that there is friction between the inkwell segments and the plate then the zeroing...

Erik87 posted a new thread.

ManRoland 706 problem

I've got a problem with ManRoland 706. When the machine start to work, the machine can't introduce the pressure in all body press . we...

Forum: Man Roland Printing Presses

Erik87 has a new avatar.

Azwir replied to the thread Roland 700 operating manual.

Please send to my email azwir2000@gmail.com Thankyou

OkiTech replied to the thread IJetColor NXT envelope printing system for sale in NJ..

OK. Drum blades replacement makes even more sense as those are made out of silicone and have shelf life as well besides wear from use....

printerscd replied to the thread INK Fountain Liner Problem.

Today was Heidelberg Servise calibration on All units zone motor. So, we will see if this help...

EliaAlexsta replied to the thread IJetColor NXT envelope printing system for sale in NJ..

Okay the printer has been sitting down for a year before it was handed to me

Chris86 attached a file to the thread A CPC-COM error.

it seems only the color zones dind´t work. After 10 minutes they work again. Fiddling arround the cables didn´t fix it. here a pic from...

Adil replied to the thread INK Fountain Liner Problem.

Use it please , good luck

OkiTech replied to the thread IJetColor NXT envelope printing system for sale in NJ..

I would start with inspecting Drum Units... When were your drums serviced or replaced last? These machines been on the market for a...