What is the minimum paper weight for USPS postcard printing?

Discussion in 'Print Community General Printing Discussion' started by RonPella, Jul 19, 2007.

  1. RonPella

    RonPella New Member

    Joined:
    Jul 2007
    Messages:
    2
    I'm going to be printing some postcards on my color copier - what is the minimum paper weight that the USPS will accept to print on for mailing postcards?
     
  2. Jeff

    Jeff Senior Member

    Joined:
    Jul 2006
    Messages:
    702
    Location:
    Michigan
    I believe it is paper thickness not weight that is regulated.

    According to http://pe.usps.com/Archive/HTML/DMMArchive0106/101.htm#wp1002733 minimum thickness for a USPS postcard is 0.007" and maximum thickness is 0.016"

    Typical coated cover stock thickness is:
    80 lb .008
    100 lb .010
    110 lb .011
    120 lb .012

    100 lb cover (270 gsm) is probably the most popular thickness for postcards. However you may find your color copier doesn't support stock this thick, in which case 80 lb cover (215 gsm) should be fine in terms of the postal regulation for postcard thickness.
     
  3. Jeff

    Jeff Senior Member

    Joined:
    Jul 2006
    Messages:
    702
    Location:
    Michigan
    Note also that uncoated paper will typically be less dense, higher bulk more thickness per weight, than a smooth finish coated paper, so if the postcard is a relatively simple low-ink (or low-toner in your case) that can use a cheaper uncoated stock you may get by with a lighter but equally thick uncoated cover stock.

    Uncoated vellum finish cardstock thicknesses are typically:
    65 lb .009
    80 lb .0105
    100 lb .0135

    vs. coated cover stock
    80 lb .008
    100 lb .010
     
Loading...