Does anone know how to bypass printhead warning on IPF 9000?

Discussion in 'Large Format Inkjet Printers' started by madmandare, Jan 4, 2011.

  1. madmandare

    madmandare Member

    Joined:
    Oct 2010
    Messages:
    21
    Location:
    Nottingham
    Hi there,

    One of my six colours (yellow) on my left printhead was minorly glogged and so i kept getting replace printhead message. I manually cleaned the printhead using distilled hot water and immediately it was fine. The nozzle test was excellent (best yellow result in ages) and other minor tests showing printed bands in all colours where also good.

    But then it started saying replace again, even though nozzle test was good. Is there anyway i can bypass this so i can atleast perform a few test prints before finally deciding whether to replace printhead?.

    Cheers
     
  2. [=Brian=]

    [=Brian=] Member

    Joined:
    Jul 2010
    Messages:
    39
    Location:
    South Florida
  3. Antonio Barrera

    Antonio Barrera New Member

    Joined:
    May 2011
    Messages:
    1
    Location:
    LA
    set the printer in move mode level 1, and shut it down, then turn it on and select the option confirming that the move has been completed... good luck..
     
Loading...