2 Color Offset Press 4+ Color Offset Press Direct Imaging Printing Press Digital Printing Press Color Copiers and Color Laser Printers Finishing Equipment Inkjet and Art Printers
2-Color Offset 4+ Color Offset Direct Imaging Digital Press Color Copiers Finishing Inkjet & Fine Art

Welcome to the Color Printing Forum


a forum for Offset Press and Digital Printing information


Please Login at the top right or Register. The Color Printing Forum is a forum to discuss offset press printing, direct imaging offset presses, digital production presses, short-run digital printing, fine art inkjet or giclee printing, and finishing equipment. Topics range from selection of new printers, printing press, and finishing equipment to adjustment, troubleshooting, optimization, and maintenance of existing printers and presses to media and finishing.


New members are encouraged to Please Register Now - it's free!
All printing equipment discussion, questions, tips and tricks are welcome. And we would like to thank experienced pressmen in advance for taking the time to share your printing experience with the Color Printing Forum community. Register »


+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Jan 2017
    Location
    Sweden
    Posts
    2

    Bizhub C360 trifold option disappeared

    I have a Bizhub C360 With a SD-509 that I bought used and when I started it recently the tri-fold option under finishing was no longer there. The only folding option that exists is half fold and that works fine with and without stitches. I can't chose trifold on the control panel, neither from my PC. I have checked the contacts between the finisher and the copier. What may have happened?.

  2. #2
    Join Date
    Jan 2008
    Location
    NEW JERSEY
    Posts
    680

    Hi, is your paper set A4-R? Try installing different driver, Post Script driver is advised for full options/attachments functionality. May be you did set a default output tray to which trifold can't exited, generally if was available and no longer, this what was done to the settings. To rule out machine issues, there should be a way to trifold when plain copies are made, set a tray to A4-R, input the original same way and see if you can trifold while copy, if you can than it is not likely your machine - it is driver or conflict within it.

  3.    Sponsored Links





  4. #3
    Join Date
    Jan 2017
    Location
    Sweden
    Posts
    2

    Thanks, I will have a look at this. I don't have the tri-/Z-folding options from my PC's but also not from the copier´s screen. When I got it a couple of days ago I powered it up having A4-papers in the LCT-tray. I then had the tri-(or Z-) fold option on its display using it as a copier. After getting the load A4R in the manual tray message, the option was all gone. I've been through the system settings and verified that folding is not "isolated" or disabled in any way but can not find that. I got feedback in another forum, that the C360 with FS-527 and SD-509 does not have other than half-fold in its specification. It should not be capable of making tri-fold or Z-folding. Any viewpoints of this?

Advertisement



 

Similar Threads

  1. C360 text and lines not crisp.
    By cybershafs in forum Konica Minolta Color Laser Printers & Color Copiers
    Replies: 0
    Last Post: 09-01-2015, 10:28 PM
  2. KM bizhub C360
    By Fangas in forum Konica Minolta Color Laser Printers & Color Copiers
    Replies: 0
    Last Post: 08-29-2013, 07:26 AM
  3. Konica bizhub c360/280/220 service manual
    By jasiekanonym in forum Konica Minolta Color Laser Printers & Color Copiers
    Replies: 0
    Last Post: 02-11-2012, 10:35 PM
  4. Are trifold bleeds cut before or after trifolding?
    By shane in forum Cutters and Trimmers
    Replies: 4
    Last Post: 10-09-2007, 12:42 PM
  5. folder needed for bifold - then trifold?
    By Jeff in forum Folders
    Replies: 3
    Last Post: 07-04-2007, 04:07 PM

Tags for this Thread