marking in perfect mode

cali8

New Member
Joined
2008
Posts
4
Geo
So cal
Hey guys I run a Komori perfector. My problem is on thin gloss stock Im marking in the beggining of the belly pan it bulds up ink on the lip of the belly pan right after the coater back cylinder and starts marking the backside of the sheet. Now Ive adjust my belly pan air up down but I believe its slapping on that lip. Does anybody have any ideas or suggestions that dont include running inline mode. Thank you.
 
I never had match luck running coated stock on a perfector. A nice Patina matta works fine.
 
    • could be you need some more guides
    Komolri did not think of every thing - try adding your self (but with max care - not sure - don't touch)
     
    Meny said:
    - try adding your self (but with max care - not sure - don't touch)
    Click to expand...

    what ??

    Think its more an air thing, metal guides will mark even more.

    Is there any air pushing the sheet down from the top, maybe from the drier.

    Regards.
     
    put weather stripping on the belly pan lined up with any gutters on your sheet?
     
    You must log in or register to reply here.
    Forum posts represent the experience, opinion, and view of individual users. The Color Printing Forum does not necessarily endorse nor share the view of each individual post. When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.

    Similar threads

    damper gear marking
    Replies
    0
    Views
    3K
    northern-andy
    problem with anti-marking net/film/paper @ICP
    Replies
    17
    Views
    10K
    Lignum
    RichardK
    Komori 626EMP marking
    Replies
    1
    Views
    4K
    RichardK
    RichardK
    Tale won't push in to clamp when hanging on fourth unit before perfect or any ideas?
    Replies
    18
    Views
    6K
    wiseguy
    Back
    Top