Komori - PQC III - Ramping - Could Not Update PLC - Problem

Discussion in 'Komori Printing Presses' started by Brad ledbetter, Feb 1, 2016.

  1. Brad ledbetter

    Brad ledbetter New Member

    Joined:
    Feb 2016
    Messages:
    3
    Location:
    Gordonsville TN
    After Loading a Job and trying to make changes to a specific unit. With Auto Update Applied. Box Says Ramping - Could not update PLC. After clicking OK all of the Water and Ink settings go to 0 in all Units.

    We have had the Box come up before but it would always just affect the setting you where adjusting not the Whole Job.

    Any Ideas would be Greatly appreciated. Machine Down.
     
  2. Meny

    Meny Senior Member

    Joined:
    Apr 2008
    Messages:
    773
    Location:
    Israel
    what press is it ?

    what press is it ?
     
  3. Brad ledbetter

    Brad ledbetter New Member

    Joined:
    Feb 2016
    Messages:
    3
    Location:
    Gordonsville TN
    Komori Chambon - NEWAN (No 10I66) 12I0210 - WeB Press.
    The M1 Data has been all set to 0's
    # of units - 0
    # of ink keys - 0
    The console has the correct #'s but I cant get it to show up on the touch screen where they operators actually make the adjustments.
    Which is the PQC software.
    Any ideas?
     
  4. Meny

    Meny Senior Member

    Joined:
    Apr 2008
    Messages:
    773
    Location:
    Israel
    how old ?

    how old is the memory battery ?
     
  5. Brad ledbetter

    Brad ledbetter New Member

    Joined:
    Feb 2016
    Messages:
    3
    Location:
    Gordonsville TN
    I checked them all. They where good
     

  6. Meny

    Meny Senior Member

    Joined:
    Apr 2008
    Messages:
    773
    Location:
    Israel
    not sure

    sorry to say , i do not know this press so would not like to guide you the wrong way , based on other Komories i know.

    good luck
     
Loading...