ink fountain roller blocked

Discussion in 'Heidelberg Printing Presses' started by junjun noman, Nov 27, 2014.

  1. junjun noman

    junjun noman Member

    Joined:
    Nov 2014
    Messages:
    12
    Location:
    philippines
    help, we encountered " ink fountain roller blocked " fault on our sm 74 cp 2000. what are the possible solutions for this problem? at first we found out that one ltk 500 is burnt out. we already purchased a new ltk 500 but the fault is still there. we will appreciate your advise, thank you.:(
     
  2. junjun noman

    junjun noman Member

    Joined:
    Nov 2014
    Messages:
    12
    Location:
    philippines
    we already solved the problem, thanks.
     
  3. aqazi81

    aqazi81 Senior Member

    Joined:
    Oct 2009
    Messages:
    827
    Location:
    KARACHI PAKISTAN
    How?
     

  4. junjun noman

    junjun noman Member

    Joined:
    Nov 2014
    Messages:
    12
    Location:
    philippines
    we found out 1 pc slightly damaged nk30/30 needle bearing on ink fountain roller drive side. the damaged bearing is unrecognizable, we can turn the roller smoothly by hand, swap motors, until we decided to pull out the entire roller.
     
Loading...