Indications from Console CPC 1.04 Heidelberg SM 74.Please help....

Discussion in 'Heidelberg Printing Presses' started by mpouf, Apr 13, 2015.

  1. mpouf

    mpouf Member

    Joined:
    Mar 2014
    Messages:
    9
    Location:
    Greece
    I have recently purchased a Heidelberg Speedmaster 74 1997 model with console cpc 1.04.When the machine starts working the first you can see in the cptronic screen is the first picture included.After the machine is running normally.
    As the machine is running flashes error in yellow button and flashes the code F60 as shown in the second image.
    Please tell me your opinion.
    Regards
    George
     

    Attached Files:

  2. junker1984

    junker1984 Senior Member

    Joined:
    Jan 2010
    Messages:
    1,031
    Location:
    US, Midwest
    Many presses in my area with the F60 ground fault error. As long as press is running and all functions responding, the F60 may be overlooked. Finding the source could be very time consuming and expensive. This, in my humble opinion.
     
  3. MRFIXIT

    MRFIXIT Senior Member

    Joined:
    Aug 2014
    Messages:
    43
    Location:
    U.K.
    Hello..quite often the earth leakage can be caused by faulty water level sensors in the damping trough but it could be a wire that is shorting somewhene on the press...thanks..
     
  4. Waqas_zahid

    Waqas_zahid Senior Member

    Joined:
    May 2011
    Messages:
    234
    Location:
    Pakistan
    I second the opinions of our senior members, the whole process is time consuming and you need an expert to help you with it, if the machine is giving no other problems I also suggest you carry on with your normal routine.
     
  5. mr h

    mr h Member

    Joined:
    May 2015
    Messages:
    8
    Location:
    australia
    eak2-11
    when that screen comes up on boot up it means that some of the pushbutton globes are not working on the feeder
    check which aren't working and replace
    screen should not come back
     
  6. mpouf

    mpouf Member

    Joined:
    Mar 2014
    Messages:
    9
    Location:
    Greece
    Today I see the next image.Please tell me your opinions.
     
  7. deluxe

    deluxe New Member

    Joined:
    Jan 2016
    Messages:
    4
    Location:
    MO ,usa
    On our Heidelberg Speedmaster SM52-6-p3 we have error f60 and when we do a auto wash #4 ink train is gone from the screen. we have all the other towers but 4. Any ideas? should we fix error F60 first. the machine runs otherwise just can't auto wash all towers
     
  8. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    530
    Location:
    Kolding-Denmark
    Hi, What is the age of your machine?
     
  9. deluxe

    deluxe New Member

    Joined:
    Jan 2016
    Messages:
    4
    Location:
    MO ,usa
  10. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    530
    Location:
    Kolding-Denmark
    Please send photo of the page that shows ink train is gone. I need a photo of EAK2-4 outputs. The page is similiar to the first photo of this thread, but on 4th Printing Unit.

    Good luck,
     
  11. deluxe

    deluxe New Member

    Joined:
    Jan 2016
    Messages:
    4
    Location:
    MO ,usa
    I can't get the picture to paste.
     

  12. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    530
    Location:
    Kolding-Denmark
    Select "Go Advanced" there you can upload attachments.
     
Loading...