Heidelberg SM 102 - 10 Color P6 (Main motor Problem)

Hello ColorPrintingForum,

We are a printing house in Albania we have bought a Heidelberg SpeedMaster 102 - 10 color P6 ,we put to work the machine in thursday after one day work and everythink was working properly a problem happened with the main motor.
So our problem is when we start the machine, and the machine is put to work the main motor starts to give us a disturbing noise, and it doesn't stop. In the monitor nothing tells us the machine is running into a problem, it's all ok. You can listen to the noise in our youtube video that we uploaded. What Are Your Suggestions ?
Should we go on pressing with the machine or we must stop the machine ?



Here are the Main Motor details.







Plase tell us if you have a solution in your mind for this problem.

 

I would stop the pres and call the engineer who installed it to check.
If no solution from him - call Heidelberg "
A noise that needs not be there is bad and could damage your press more and more.
Stop othe press....

 

Thank you Meny but can you tell me what causes that disturbing noise ?

 

my hearing is not that good but...

it may be a bearing heating up ???

hard to know from a distance - get a local pro to have a look