K2 Coater

Discussion in 'Gloss Coatings' started by Marcelokaidi, Sep 27, 2011.

  1. Marcelokaidi

    Marcelokaidi Member

    Joined:
    Mar 2009
    Messages:
    8
    Location:
    Mexico
    Hi, can Spot UV coating be achieved on a K2 Coater, the ones that use an AB Dick press to feed? I just need to feed some 16pt sheets, and reserve the glue flap, of some small boxes, so no tight register requiered.
     
  2. Carlos The Printer

    Carlos The Printer New Member

    Joined:
    Aug 2014
    Messages:
    2
    Location:
    Los Angeles, California USA
    I used to work for K2 Systems in texas, remember that you are suposed to be using 0.052" blanket and under packing; just cut the under packing or cut the blanket with the under packing.
    There is an other option, utilizing a photo polymer similar to the rubber stamps. This shuld fit the same size and thikness as the blanket and install it like a blanket
     
Loading...