feeder issues

Discussion in 'DI Presses' started by SCruz, Nov 25, 2014.

  1. SCruz

    SCruz Member

    Joined:
    Aug 2013
    Messages:
    27
    Location:
    Tampa,Florida USA
    Does anyone know how to adjust the feeder timing on a QMDI Pro? I recently had an ink tack problem but a tech was called and he changed the timing before he realized it was an ink/temperature issue.Now feeding is a major problem and i cant get a hold of the tech. Im willing to try myself but im not sure where the adjustment is. Any info would be great. Thanks
     
  2. Bill Borcicky

    Bill Borcicky Senior Member

    Joined:
    Jul 2012
    Messages:
    214
    Location:
    U.S. Amory, Ms.
    Have you adjusted the vacuum controls on the feed table? Is the paper feeding up to the headstop , jogging ok?, going into the grippers , overshooting the grippers, or not reaching the grippers in time?
     
  3. SCruz

    SCruz Member

    Joined:
    Aug 2013
    Messages:
    27
    Location:
    Tampa,Florida USA
    Hey Bill, after the nightmare that i went through it turned out to be a broken air hose that was causing a weak air blast at the feeder. Thanks for the response.
     
Loading...