aligment of the ink fountaing blades

Discussion in 'DI Presses' started by Orange print, Oct 30, 2009.

  1. Orange print

    Orange print Senior Member

    Joined:
    Feb 2009
    Messages:
    78
    Location:
    Tirana, Albania
    hi again
    i need to do a re-register of the ink fountation but with all the tools,and gauges that this procces need.
    who might have those tools:
    1-aligment device(bv.009.56 67)
    2-shims (bp.006.1412)
    3-threaded spindle (bv.009.5642)
    4-stem (bv.009.5648)
    who might can gives me or now anybody tell me where to buy
     
  2. Orange print

    Orange print Senior Member

    Joined:
    Feb 2009
    Messages:
    78
    Location:
    Tirana, Albania
    hi again
    i need to do a re-register of the ink fountation but with all the tools,and gauges that this procces need.
    who might have those tools:
    1-aligment device(bv.009.56 67)
    2-shims (bp.006.1412)
    3-threaded spindle (bv.009.5642)
    4-stem (bv.009.5648)
    who might can gives me or now anybody tell me where to buy
     
  3. QMDavor

    QMDavor QM DI press operator

    Joined:
    Feb 2008
    Messages:
    51
    Location:
    Pazin / Croatia
    try in nearest Heidelberg office or ask Jan Rozek. he probably have those tools and can make good service on your press. i recommend him.
     
  4. jan

    jan Senior Member

    Joined:
    May 2009
    Messages:
    237
    Location:
    Austria & Poland
    Thank you Davor for your recommendation.
    Yes , indeed I own those tools and could fix this problem.
    Just ask Marcel to contact me.
    rgds
    Jan
    PS
    I could provide those tools for you as well. But they are very expensive and the service would be cheaper than
    the tools them self.
     
  5. aqazi81

    aqazi81 Senior Member

    Joined:
    Oct 2009
    Messages:
    827
    Location:
    KARACHI PAKISTAN
    orange u dont need to buy those expensive tools...its not that difficult to reset the duct blades...
     
  6. Orange print

    Orange print Senior Member

    Joined:
    Feb 2009
    Messages:
    78
    Location:
    Tirana, Albania
    i know but i never do this before,i do at cyan section and the ink is a disaster so i cant do without those tools,
    mrs heidelberg i will tell marsel for your response
    regards
     
  7. mrheidelberg

    mrheidelberg Senior Member

    Joined:
    Jan 2008
    Messages:
    761
    Location:
    United Kingdom
    Hi E,

    Email sent to Marsel.

    Regards.
     

  8. Orange print

    Orange print Senior Member

    Joined:
    Feb 2009
    Messages:
    78
    Location:
    Tirana, Albania
    i sent this message with email marsel
     
Loading...