2 Color Offset Press 4+ Color Offset Press Direct Imaging Printing Press Digital Printing Press Color Copiers and Color Laser Printers Finishing Equipment Inkjet and Art Printers
2-Color Offset 4+ Color Offset Direct Imaging Digital Press Color Copiers Finishing Inkjet & Fine Art

Welcome to the Color Printing Forum


a forum for Offset Press and Digital Printing information


Please Login at the top right or Register. The Color Printing Forum is a forum to discuss offset press printing, direct imaging offset presses, digital production presses, short-run digital printing, fine art inkjet or giclee printing, and finishing equipment. Topics range from selection of new printers, printing press, and finishing equipment to adjustment, troubleshooting, optimization, and maintenance of existing printers and presses to media and finishing.


New members are encouraged to Please Register Now - it's free!
All printing equipment discussion, questions, tips and tricks are welcome. And we would like to thank experienced pressmen in advance for taking the time to share your printing experience with the Color Printing Forum community. Register »


+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    Join Date
    Oct 2010
    Location
    s
    Posts
    25

    Polar-mohr 72 CS user guide needed urgently

    Hi Guys

    I am looking for a polar mohr 72CS user guide. I have problem cutting on this unit. Instead of the paper cutting in a striaght line like this " l " it cuts the paper like this "/ " . I have checked my backguage and it seems to be acurate. I am lost with this machine. Please help..... Thanks guys

  2. #2
    Join Date
    Jan 2011
    Location
    Winnipeg, Manitoba
    Posts
    293

    Squaring cutter is very touchie job, take a picture or two of the backgate and post it then I'll try and talk you through it, funny I just squared a Challenge this morning.

  3. #3
    Join Date
    Mar 2011
    Location
    uk
    Posts
    1

    Hi your problem might not be with your backgauge. You need to check that your clamp is working. If there is no clamp pressure then the knife will drag your material. If your guillotine is a mid 70's to early 80's machine you need to check the clamp pressure pedal. The plastic pedal normally splits at the bottom this results in no clamp pressure. A simple check is to place a pile of material under the clamp, put a coin under the clamp away from the knife, set the clamp on low pressure and take a cut, without cutting the coin. The coin should make a slight indentation. Increase the clamp pressure to maximum, move the coin to another spot and take a cut. You should be able to see if the clamp pressure is working.

    The key to cutting paper is to have a sharp knife, correct clamp pressure and a square back gauge.

    Hope this helps.
    Quote Originally Posted by Paven View Post
    Hi Guys

    I am looking for a polar mohr 72CS user guide. I have problem cutting on this unit. Instead of the paper cutting in a striaght line like this " l " it cuts the paper like this "/ " . I have checked my backguage and it seems to be acurate. I am lost with this machine. Please help..... Thanks guys

  4.    Sponsored Links





  5. #4
    Join Date
    Sep 2014
    Location
    Puerto Rico
    Posts
    64

    please reach me
    franco72
    ercupa@netscape.net

Similar Threads

  1. urgently looking for ryobi 3304 ha
    By capt chaos in forum Ryobi Printing Presses
    Replies: 4
    Last Post: 11-29-2011, 01:26 AM
  2. Heidelberg CD 102 5 L - need a SVT power part urgently
    By rangarkolli in forum 4-Color Offset Presses +
    Replies: 2
    Last Post: 02-22-2011, 09:02 AM
  3. Rigger needed in Chicago - urgently!
    By ScotJ in forum Heidelberg Printing Presses
    Replies: 1
    Last Post: 12-02-2010, 10:51 PM
  4. We urgently buy
    By usedprintingmachine in forum Offset & Digital Presses for sale
    Replies: 0
    Last Post: 09-22-2009, 11:49 AM
  5. Guide Me!
    By ali in forum 1-Color and 2-Color Offset Presses
    Replies: 4
    Last Post: 10-31-2007, 04:47 AM