Looking for Parts and Supplies

Discussion in 'Cutters and Trimmers' started by 4stateprinting, Dec 15, 2008.

Tags:
  1. 4stateprinting

    4stateprinting Member

    Joined:
    Dec 2008
    Messages:
    11
    Location:
    Beautiful Columbus KS
    I purchased my shop about a two years ago. The cutter I have came with the shop, it is an EBA Prazision Multicut 10/720 E. I had never heard of the cutter before and I am having the problem of finding supplies. I have check with my suppliers they can provide cutting sticks but nothing more. If any one has any suggestions or ideas they would be appreciated.
     
  2. Mechanic

    Mechanic Senior Member

    Joined:
    Aug 2009
    Messages:
    107
    Location:
    Greece
    I work for an EBA dealer. Is ther esomething specific that you need?
     
  3. 4stateprinting

    4stateprinting Member

    Joined:
    Dec 2008
    Messages:
    11
    Location:
    Beautiful Columbus KS
    Specifically, I need to find the light bulbs, the cutter sticks and a place that I can get other parts in case anything goes out. I have called several "vendors" and have found a few for the sticks but nothing else, the lights are the big thing, they are not working, former owner thought it was a short but was at a complete loss with the manual being in german/russian (something different for sure). Any way if you can direct me to some help on this that would be great.
     
  4. Mechanic

    Mechanic Senior Member

    Joined:
    Aug 2009
    Messages:
    107
    Location:
    Greece
  5. 4stateprinting

    4stateprinting Member

    Joined:
    Dec 2008
    Messages:
    11
    Location:
    Beautiful Columbus KS
    The former owner had an electrician wire it all up, its on 220V 3 phase, with a plug.
    I contacted my vendors about the bulbs and they all told me the same without know exactly what they needed they hated to send the wrong part, I offered to send them a bulb to match and they declined, saying they had never heard of the machine
     
  6. Mechanic

    Mechanic Senior Member

    Joined:
    Aug 2009
    Messages:
    107
    Location:
    Greece
    If it is a 3phase mashine, then it sould be 3x400V, if it is a single phase, it sould be 1x240V. Unless you have a transformer (input 3x220, output 3x400) the voltage is wrong. Probably that is the reason why your bulbs burn out. Right now we are on holiday (my company, the Germans, almost the hole Europe). I work on offset, so I dont know much on guillotines, but I will get back to you with a manual (cant promise you anything, I will do my best ) and some more infos on that Voltage thing. Dont hesitate to contact the Germans on that link that I posted. You wont get an immediate responce, cuz of the holiday, but they will help you.
     
  7. printfinisher

    printfinisher Member

    Joined:
    Jul 2007
    Messages:
    9
    Contact Sydney Stone - we have long been the Canadian dealer for EBA product. We have the parts manuals etc and could help you out.

    website is www.printfinishing.com toll free phone number is 1-800-668-6055
     

  8. Caligonz07

    Caligonz07 New Member

    Joined:
    Jun 2022
    Messages:
    3
    Location:
    Colombia
    Good morning, did you still having the EBA multicut 10/720 cutter?
     
Loading...