Color Printing & Color Printer Forum
Digital Printing Press Forum: Canon imagePRESS Digital Presses

Go Back   Color Printing Forum > Digital Printing Press Forum > Canon imagePRESS Digital Presses
Register FAQ Members List Print Directory Search Today's Posts Mark Forums Read

2 Color Offset Press 4+ Color Offset Press Direct Imaging Printing Press Digital Printing Press Color Copiers and Color Laser Printers Finishing Equipment Inkjet and Art Printers
2-Color Offset 4+ Color Offset Direct Imaging Digital Press Color Copiers Finishing Inkjet & Fine Art

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1  
Old 08-20-2007, 12:05 PM
hum2610 hum2610 is offline
Junior Member
 
Join Date: Aug 2007
Posts: 2
Default ImagePRESS C1 Enquiries

Hi. New to this forum and thought I'd put it to the test. Ok first question

1) I'm about to purchase a C1 in my country and need help on price comparison. Has anyone here purchased a C1 with the AA1 Standard finisher, along with, 1 ream each of Canon Paper A4, F4 & A3 Size, 1 tube of Canon Toner and 1 unit of Pedestal at around USD 33,000. Does this sound about right?

2) Anyone who has purchased the C1, how much does it cost (on those not on per click) to print (ink cost) minus the paper cost for a color copy?

This will be of great help. Thanks!
Reply With Quote
  #2  
Old 08-20-2007, 05:35 PM
Jeff Jeff is offline
Senior Member
 
Join Date: Jul 2006
Location: Lake Michigan
Posts: 215
Default

Others can answer this question much better than I at this point (I don't have an imagePRESS, yet), but the price sounds on the cheap side. I thought these were still in the 60k range. Is that price you were quoted with the canon p1 print controller not with the Fiery T1 RIP? Even on our imagerunners we went with the Fiery RIPS (and are pleased) -- I've not used one with only the canon controller so I can't comment on what you sacrifice.

As far as operating costs not on a click contract, hopefully others who are currently running an ImagePress C1 now in some volume will jump in to better answer this.

Obviously you'll have some fairly constant costs such as fusers which only depend somewhat on the heaviness of the stock you're running.

Then you have drum cost which depends on the quality you need or want to maintain; if you need consistent solid areas of color you will need to replace a drum more often than if you are printing photographs; if you are printing photographs you will need to replace a drum more often than if you were printing very light coverage.

And then there is toner where you need to get a good idea of the average coverage of the jobs you'll run; then calculate your coverage (20%, 30%) vs. the 5% coverage toner cartridges are typically rated for, and you'll at least have a close number to the actual yield you'll see. (and it's hard to say how toner and drum prices might change a bit in the retail market as these machines mature)
Reply With Quote
  #3  
Old 08-21-2007, 05:06 PM
Jeff Jeff is offline
Senior Member
 
Join Date: Jul 2006
Location: Lake Michigan
Posts: 215
Default

Sorry - mcauley has the definitive answer in the other thread you posted your question in: http://www.colorprintingforum.com/ca...2.html#post783

It appers the ballpark pricing I got this spring is quite on the high side by over 10k, which is great news for me as I'm a little closer now than I was yesterday!
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes






All times are GMT -4. The time now is 01:39 AM.


© 2006-2008 Color Printing Forum - the new digital information source for color printers & the business of color printing.
Powered by vBulletin which is Copyright ©2000 - 2007, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Canon, CLC, Docucolor, Electronics for Imaging, EFI, Fiery, Heidelberg, HP, Kodak, Imagerunner, Imagepress, Nexpress, Presstek, Ricoh, Ryobi, Xante, Xeikon, Xerox, and other Registered Trademarks are the property of their respective companies.
Google