I got an ImagePress C1 with T1 server. Two days ago it prints red (Magenta 100%+Yellow 100%) in Brown after the service of replacement of a fixing roller. I was trying to calibrate with Fiery ColorWise Tool. But I didn't know how to configure it. Anyone would give instruction for that issue?

Now it's worse. It doesn't print at all. All job can be processed but can print. Tried to print a test page the printer's green light flashed a few times but won't print. anybody can tell why?

Hi Alberta,

Calibrate the Engine first:
1. Go to Additional Function> system settings> look for the auto gradation.
Make sure you have 100 gsm plain paper preferrably MONDI business paper.
2. Densitometer correction. Print the patches and measure and then input it to the printer.

3. Print the shading correction.

Caibrate it with the Colorwise.
1. Go to COLORWise,> calibrator > shading correction tab and measure.
2. Print the linearization chart> measure it and your done.

Check the mismatch function if aactivated for suspension if not
you better call service. that is real problem of T1.