|2-Color Offset||4+ Color Offset||Direct Imaging||Digital Press||Color Copiers||Finishing||Inkjet & Fine Art|
Welcome to the Color Printing Forum
a forum for Offset Press and Digital Printing information
Please Login at the top right or Register. The Color Printing Forum is a forum to discuss offset press printing, direct imaging offset presses, digital production presses, short-run digital printing, fine art inkjet or giclee printing, and finishing equipment. Topics range from selection of new printers, printing press, and finishing equipment to adjustment, troubleshooting, optimization, and maintenance of existing printers and presses to media and finishing.
New members are encouraged to Please Register Now - it's free!
All printing equipment discussion, questions, tips and tricks are welcome. And we would like to thank experienced pressmen in advance for taking the time to share your printing experience with the Color Printing Forum community. Register »
We have a C1+ that we bought in april - It seems to have 2 reoccuring problems - first, a black "toner spray" appearing on the operators side - not just during black runs - it comes and goes - the drum has been replace 3 times - the transfer belt 4 - the black developer housing 2 - Its back again - any ideas? second is a line on the edge of 13x19 stock - comes and goes - the tech comes out and cleans and it magically goes away until the next time I run 13x19 - once again any Ideas?
Tags for this Thread