Saddle Stitching on IRC3220

Discussion in 'Canon Color Laser Printers & Color Copiers' started by aquaihoi, Mar 5, 2009.

  1. aquaihoi

    aquaihoi Member

    Joined:
    Mar 2009
    Messages:
    8
    Location:
    Australia, Small Business
    Hey Folks,

    I just got my mitts on a IRC3220 + C1 Rip + N2 Finisher unit, I have everything working nicely, however, when I make booklets say 16 page with the saddle stitcher, it doesn't print in the center where the staples go, and leaves a strip missing - annoying when you have a full page spread with a cool bg watermark.

    I did not get any instruction or booklets with this printer so have pretty much set it up on my own merits and with the aid of the internet.

    Is there any setting for this in the C1 rip ? I cannot seem to find anything on this anywhere. I am on Mac as well but that shouldn't be an issue.

    My way around this has been to print all the sheets duplex, then send the pre printed sheets through the machine again for stapling. I am happy to continue doing it this way - but if there is a better way to saddle stitch and have your graphics printed properly then I would like to know !!