komori 228 the feeder stop

Discussion in '1-Color and 2-Color Offset Presses' started by MILENIO, May 21, 2012.

  1. MILENIO

    MILENIO New Member

    Joined:
    May 2012
    Messages:
    3
    Location:
    Colombia
    when the press is runing to start the print ( in auto option or product start and detector double sheet on and dampening rollers on) i put the pump on then put the feeder on but this move the sheet a few and feeder off (not is by the mechanism of double sheet detector), new put the feeder on and send sheet. in other case, without put the pump only the feeder on this operate ok but when put the pump on immediately the feeder stop and is necesary put on the feeder again, this problem causes that sometimes the ink roller in auto no apply when the cylinders engage then is necesary put manual the ink roller and push continuosly the botton of pump on by no stop the pump and can print.
    please thank you your important answer and i hope with your help to solve this problem.
     
Loading...