heidelberg axis control

Discussion in '1-Color and 2-Color Offset Presses' started by garthd@barriepress.com, Aug 28, 2014.

  1. garthd@barriepress.com

    garthd@barriepress.com New Member

    Joined:
    Aug 2014
    Messages:
    3
    Location:
    ontario canada
    we have a 2005 CD746PLX with axis control. The scanner for the axis control is not functioning properly. According to heidelberg it can scan, but is simply not moving into position in order to do so. The scanner head will move in both X and Y directions upon start up, but will not do so in order to take a reading
    Heidelberg solution, twenty thousand dollars worth of parts.
    I have no experience with the device, but it seems that if it scans, and can move properly it would be a software issue..?
    Anyone had any experience in getting this device repaired?
     
  2. peterh

    peterh Senior Member

    Joined:
    Dec 2010
    Messages:
    48
    Location:
    south wales
    Hi
    We use axis control
    What actually happens when you take a reading?
    Does it give errors at all
    Ie does it give lamp errors
    Are you using correct colour bar?
    Peter
     
Loading...