A B Dick 9870 Emergency Switch Trouble

Discussion in '1-Color and 2-Color Offset Presses' started by Steevm69, Jan 20, 2009.

  1. Steevm69

    Steevm69 New Member

    Joined:
    Jan 2009
    Messages:
    1
    Location:
    Dundee, Scotland
    Our 9870 stops dead of it's own accord quite frequently with the control panel display reading 'Emergency Sw Trouble'... Anyone else had this problem? cheers.
     
  2. smikes

    smikes Member

    Joined:
    Jun 2007
    Messages:
    11
    Location:
    Lakeville, Pa
    Check your switches on your covers and make sure they haven't bent.My 9870 would get a E.S. message while running and it would be the safty covers rocking on the dip switch.
     
  3. pressing situation

    pressing situation Member

    Joined:
    Jul 2008
    Messages:
    26
    Location:
    Connecticut USA
    Check all your sensors that they are free of dirt and powder, and if you get too frustrated, go to the non operator side lower panel, open it up and pull the white plug out to bypass a lot of those irritating problems.

    Good Luck
     
Loading...