2 Color Offset Press 4+ Color Offset Press Direct Imaging Printing Press Digital Printing Press Color Copiers and Color Laser Printers Finishing Equipment Inkjet and Art Printers
2-Color Offset 4+ Color Offset Direct Imaging Digital Press Color Copiers Finishing Inkjet & Fine Art

Welcome to the Color Printing Forum


a forum for Offset Press and Digital Printing information


Please Login at the top right or Register. The Color Printing Forum is a forum to discuss offset press printing, direct imaging offset presses, digital production presses, short-run digital printing, fine art inkjet or giclee printing, and finishing equipment. Topics range from selection of new printers, printing press, and finishing equipment to adjustment, troubleshooting, optimization, and maintenance of existing printers and presses to media and finishing.


New members are encouraged to Please Register Now - it's free!
All printing equipment discussion, questions, tips and tricks are welcome. And we would like to thank experienced pressmen in advance for taking the time to share your printing experience with the Color Printing Forum community. Register »


+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    Join Date
    Mar 2008
    Location
    Monterrey, Mexico
    Posts
    66

    Ab dick 9910XCS Service Manual?

    Hello,

    Just got a used AB Dick that came with operating manual but i can't find in it (manual) directions on calibrating form rollers. Is there a "Service Manual" that explains how to do so? I also need info so as to know wheter the pressure between plate and blanket is good(not to high) and can't seem to be able to find it as well in the manual i have.

    Anyone knows about it? Willing to sell a hard or digital copy? A parts catalog would be nice too.

    Thanks!
    Moe

  2. #2
    Join Date
    Aug 2009
    Location
    Greece
    Posts
    108

    The operating manual describes the roller settings. You need to undo the side covers. Then , pull the levers that engage- disengage the form rollers (drive side) , in order to locate the mechanism. On this mechanism, there are straight screwdriver screws that set the form rollers on the oscillators. Set them all on 3 mm. I dont understand inches. AFTER you have set the form rollers on the oscillators, set the form rollers on the plate cylinder. On the same mechanism there are eccentric 19 mm adjusters with locking nuts , 13 mm if I remember correctly. MAKE SMALL ADJUSTMENT MOVEMENTS !!! Set everything to 3 mm, only the last form roller set it to 2,5 mm on the plate. The lever for throwing the roller onto the plate is on the operator side. Don't mix the water form roller adjuster with the 1st ink form roller adjuster. Get an operating manual and a spare manual

  3. #3
    Join Date
    Aug 2009
    Location
    Greece
    Posts
    108

    this might help you some more
    Attached Files

  4.    Sponsored Links





  5. #4
    Join Date
    Mar 2008
    Location
    Monterrey, Mexico
    Posts
    66

    Thanks Mechanic,

    I checked the pressure and it's ok. I'll keep this sheets close to the machine for future reference. Just one thing... From what i can get from this manual, there is only one adjusting screw that moves roller both to ocillator and plate cylinder... Is that so? Then that should mean that when set to plate, roller should automatically be also set to ocillator.(which makes no sense to me for rollers tend to shrink)

    Any comments?

    Geetings!

Similar Threads

  1. Looking for a Service Manual for Ryobi 3200 MCD
    By ziggy33 in forum Ryobi Printing Presses
    Replies: 6
    Last Post: 04-05-2014, 11:31 PM
  2. Need Adast 313 Service Manual
    By demel in forum 1-Color and 2-Color Offset Presses
    Replies: 45
    Last Post: 08-27-2013, 03:40 PM
  3. Service Manual Adast 525
    By gordiano in forum 1-Color and 2-Color Offset Presses
    Replies: 0
    Last Post: 06-26-2010, 12:23 AM
  4. I'm looking for electric service manual for MOZ-E
    By artdesign-pr in forum 1-Color and 2-Color Offset Presses
    Replies: 2
    Last Post: 04-25-2010, 10:14 AM
  5. HELP! Will pay $100 for AB Dick 8015 collator manual.
    By Alton in forum Collator-Booklet Maker Systems
    Replies: 0
    Last Post: 05-16-2008, 12:47 AM

Tags for this Thread